|
|
in2Pro Tiger Manipulator
<
back to in2Pro
Series
 |
 |
| in2Pro
Tiger Manipulator. |
|
|
The in2Pro
Tiger Manipulator is specifically designed to maximize the
testing time you get with your Teradyne Tiger test system, with state-of-the-art
dynamics and virtually effortless control.
The in2Pro Tiger's counterbalanced design is independently movable
and lockable in both the linear and rotational axes. Its power-assisted
motions incorporate precision compliance to allow exceptionally fast,
safe docking to your probers and handlers.
The unit is designed to permit vertical, side-to-side, and in-out
motions even without electrical power, to simplify undocking if you
lose electrical power. It also features a Rise Brake to prevent any
unexpected movements of the test head while weights are being changed.
The in2Pro Tiger uses TELESYNCH "! cable control. This patented cable
management system extends your cable life and reduces your operating
costs by minimizing the twisting and bending stress on your high-performance
cable bundles. |
|
 Motion
Ranges and Specifications:
All motions are power-assisted except for Base Swing,
which is manual and has a pneumatic lock in three positions.
|
|
|
| Side-to-Side
(left-to-right) |
|
10" (254mm) 5" from center |
|
|
|
| In-Out
(front-to-back) |
|
4" (102mm) 2" from center |
|
|
|
| Base
Swing (from nominal) |
|
+30 degrees (254mm) / -5 degrees |
|
|
|
| Vertical
(up-down) |
|
45" (1143mm) |
|
|
|
| Rotate
(twist from DUT-down plane) |
|
+190 degrees (CCW) to DUT-up
position
-90 degrees (CW) to DUT-forward (service) |
|
|
|
| Cable
Lift |
|
24 (889mm) |
|
|
|
| Compliance
in Base Motion |
|
1 (25mm) side-to-side and in-out |
| |
|
Dimensions
and Weight:
|
|
| Base
|
|
52W x 67D |
|
|
|
| Height
|
|
97.2H |
|
|
|
| Shipping
Weight (approx.) |
|
3,100 lbs (test head crate)
2,800 lbs (counter weight crate) |
|
|
 To
top
© 2005-2011 inTEST Corporation. All rights reserved. Privacy/Legal.
inTEST Corporation 804 East Gate Drive, Suite 200, Mount Laurel, NJ 08054
856-424-6886
|
